Olympic Bar | 2.2m x 5cm | 20kg | Needle Bearing | Premium Commercial Grade | Joinfit
HK$1,824.00 – HK$3,600.00
- Diameter: 28.5MM
- Weight: 20KG
- Stainless Steel Shaft
- Sleeves: Stainless Steel
- Chrome Coated
- Dual Knurl Marks for Olympic and Power lifts
- No Center Knurl
- 200,000 PSI Tensile Strength Steel
- Needle Bearing (4 & 8 bearings in the 3 different models respectively)
- Max Load : 450kg or 680kg or 900kg in the 3 different models respectively
- 41.5cm loadable sleeve length
- Joinfit Pro branded endcaps
J.S.073BÂ Â ME-450-75Â Â ME-680-6
Description
Joinfit Olympic bar is of very good quality and suitable for power lifting. All bars are precision engineered for balance and long-lasting performance. It’s designed with a medium-depth, diamond-knurled surface, while swiveling sleeves keep it from warping and reduce pressure on the wrists
Available in the following specifications:
- 2.2m (43+134+43cm), net weight = 20kg,  Carbon Steel, 4 needle bearings, Max load = 450 kg
- 2.2m (43+134+43cm), net weight = 20kg,  Carbon Steel, 8 needle bearings, Max load = 680 kg
- 2.2m (43+134+43cm), net weight = 20kg,  Carbon Steel, 8 needle bearings, Max load = 900 kg
**This is Power Lifting Gear – very good quality suitable for less dynamic deadlift, squat, bench press and other less impact-type lifting moves alike. There is less spring in the bar and those are less drop-resistant plates. If you need a barbell which you can always drop to the ground, or you need a barbell with which you exercise very heavy snatch and clean, please turn to our products in the pricier weight lifting category
Additional information
2.2m Power Lifting Olymipc Bar | 20kg Bar Max Load=450kg, 20kg Bar Max Load=680kg, 20kg Bar Max Load=900kg |
---|
4 reviews for Olympic Bar | 2.2m x 5cm | 20kg | Needle Bearing | Premium Commercial Grade | Joinfit
You must be logged in to post a review.
Marc Black –
Was doing alot of online research looking for a decent bar for someone on a tighter budget. I didn’t want to fork out for a Rogue to ship to HK from the US. I had an EZ curl bar from Joinfit already, also some dumbells and plates, and they are all good quality and work just fine. This is a great bar for the price. The knurls are at a nice medium depth not to deep, and not to smooth (there is no center knurl for those who do snatching, etc. But I personally prefer my bars without it). I gave it a test roll on the floor and this bar rolled perfectly flat, as it should, so I know it isn’t bent or warped. The end sleeves have a nice spin time (for those who don’t know, sleeves spin to reduce tension on the wrists, allow the weights to move easier, and allow for smoother lifts). I tested both ends three times each, and the average was about 3 to 4 seconds, giving it a pretty hard double hand turn. The most I’ve added to this bar so far was 500lbs for a standard deadlift, and there wasn’t even the slightest bend, so this bar definitely can handle heavy weight. Recommend.
Anthony –
Awesome bar! knurling is impeccable. not too coarse but very grippy at the same time. Still waiting on some plates which are on the way and I can’t wait. Love the diameter and spacing of lines for hand placement. Collars and plates fit perfect and are also very well made. I’ve done a lot of homework on bars and plates and I think it is absolutely the best bang for your buck. Worth every penny.
Arman –
The quality of the bar is very high standard, knurl marks are done well, grip WELL, at the same time gentle on the hand, I love the fact that they used good bearings; This bar is going to be with me for the rest of my life. I am thinking of taking it with me to the grave! Just, well done
Cyrus Humme –
I’ve been using this bar for about 1 year now.
Overall impressions are great. Bar is very comfortable. Diameter is good. Whip is good for. Knurling is the best i’ve felt.